4v drive pch mosfet RRF015P03 ? structure ? dimensions (unit : mm) silicon p-channel mosfet ? features 1) low on-resistance. 2) high power package. 3) 4v drive. ? application switching ? packaging specifications ? inner circuit package taping code tl basic ordering unit (pieces) 3000 RRF015P03 ? ? absolute maximum ratings (ta = 25 ? c) symbol limits unit drain-source voltage v dss ? 30 v gate-source voltage v gss ? 20 v continuous i d ? 1.5 a pulsed i dp ? 6a continuous i s ? 0.6 a pulsed i sp ? 6a power dissipation p d 0.8 w channel temperature tch 150 ? c range of storage temperature tstg ? 55 to +150 ? c *1 pw ? 10 ? s, duty cycle ? 1% *2 mounted on a ceramic board. ? thermal resistance symbol limits unit channel to ambient rth (ch-a) 156 ? c / w * mounted on a ceramic board. parameter type source current (body diode) drain current parameter *2 *1 *1 * *2 *1 *1 (1) gate (2) source (3) drain ?1 esd protection diode ?2 body diode abbreviated symbol : uj tumt3 0.2max. ? 2 ?1 (3) ( 1) (2) 1/5 2010.08 - rev.a www.rohm.com ?2010 rohm co., ltd. all rights reserved.
RRF015P03 ? electrical characteristics (ta = 25 ? c) symbol min. typ. max. unit gate-source leakage i gss -- ? 10 ? av gs = ? 20v, v ds =0v drain-source breakdown voltage v (br)dss ? 30 - - v i d = ? 1ma, v gs =0v zero gate voltage drain current i dss -- ? 1 ? av ds = ? 30v, v gs =0v gate threshold voltage v gs (th) ? 1.0 - ? 2.5 v v ds = ? 10v, i d = ? 1ma - 115 160 i d = ? 1.5a, v gs = ? 10v - 170 240 i d = ? 0.7a, v gs = ? 4.5v - 190 270 i d = ? 0.7a, v gs = ? 4v forward transfer admittance l y fs l 1.2 - - s i d = ? 1.5a, v ds = ? 10v input capacitance c iss - 230 - pf v ds = ? 10v output capacitance c oss - 40 - pf v gs =0v reverse transfer capacitance c rss 33 - pf f=1mhz turn-on delay time t d(on) - 12 - ns i d = ? 0.7a, v dd ? 15v rise time t r -8-nsv gs = ? 10v turn-off delay time t d(off) - 40 - ns r l 21.4 ? fall time t f - 13 - ns r g =10 ? total gate charge q g - 3.2 - nc i d = ? 1.5a, v dd ? 15v gate-source charge q gs - 1.2 - nc v gs = ? 5v r l 10 ? gate-drain charge q gd - 0.7 - nc r g =10 ? *pulsed ? body diode characteristics (source-drain) (ta = 25 ? c) symbol min. typ. max. unit forward voltage v sd -- ? 1.2 v i s = ? 1.5a, v gs =0v *pulsed conditions conditions parameter parameter static drain-source on-state resistance r ds (on) m ? * * * * * * * * * * * * * * * * * * 2/5 2010.08 - rev.a data sheet www.rohm.com ?2010 rohm co., ltd. all rights reserved.
RRF015P03 ? electrical characteristic curves 10 100 1000 0.1 1 10 v gs = ? 4.5v pulsed 0 1 2 3 0 0.2 0.4 0.6 0.8 1 t a =25c pulsed v gs = ? 10v v gs = ? 4.5v v gs = ? 4.0v v gs = ? 2.5v v gs = ? 3.0v 0.001 0.01 0.1 1 10 01234 v ds = ? 10v pulsed t a = 125c t a = 75c t a = 25c t a = ?? 25c 10 100 1000 0.1 1 10 v gs = ? 4.0v v gs = ? 4.5v v gs = ? 10v t a =25c pulsed 0.01 0.1 1 10 0 0.5 1 1.5 v gs =0v pulsed t a = 125c t a = 75c t a = 25c t a = ?? 25c 0 1 2 3 0246810 v gs = ? 3.0v t a =25c pulsed v gs = ? 10v v gs = ? 4.5v v gs = ? 4.0v v gs = ? 2.5v 10 100 1000 0.1 1 10 v gs = ? 10v pulsed 0.1 1 10 0.01 0.1 1 10 v ds = ? 10v pulsed t a = ? 25c t a =25c t a =75c t a =125c 10 100 1000 0.1 1 10 v gs = ? 4.0v pulsed fig.1 typical output characteristics( ) fig.2 typical output characteristics( ) fig.3 typical transfer characteristics fig.4 static drain-source on-state resistance vs. drain current( ) fig.5 static drain-source on-state resistance vs. drain current( ) fig.6 static drain-source on-state resistance vs. drain current( ) fig.7 static drain-source on-state resistance vs. drain current( ) fig.9 reverse drain current vs. sourse-drain voltage fig.8 forward transfer admittance vs. drain current drain current : ? i d [a] drain-source voltage : ? v ds [v] drain-source voltage : ? v ds [v] drain current : ? i d [a] drain current : ? i d [a] gate-source voltage : ? v gs [v] drain-current : ?? i d [a] static drain - source on - state resistance : r ds ( on )[m ? ] drain-current : ? i d [a] static drain - source on - state resistance : r ds ( on )[m ? ] drain-current : ? i d [a] static drain-source on-state resistance : r ds ( on )[m ? ] drain-current : ? i d [a] static drain - source on - state resistance : r ds ( on )[m ? ] forward transfer admittance : |yfs| [s] drain-current : ? i d [a] source current : ? i s [a] source-drain voltage : ?? v sd [v] t a = 125c t a = 75c t a = 25c t a = ?? 25c t a = 125c t a = 75c t a = 25c t a = ?? 25c t a = 125c t a = 75c t a = 25c t a = ?? 25c 3/5 2010.08 - rev.a data sheet www.rohm.com ?2010 rohm co., ltd. all rights reserved.
RRF015P03 0 100 200 300 400 500 0 5 10 15 t a =25c pulsed i d = ?? 0.7a i d = ? 1.5a 0 2 4 6 8 10 01234567 t a =25c v dd = ? 15v i d = ? 1.5a r g =10? pulsed 10 100 1000 0.01 0.1 1 10 100 c iss c oss c rss t a =25c f=1mhz v gs =0v 1 10 100 1000 0.01 0.1 1 10 t f t d(on) t d(off) t a =25c v dd = ?? 15v v gs = ?? 10v r g =10? pulsed t r fig.10 static drain-source on-state resistance vs. gate source voltage fig.12 dynamic input characteristics fig.13 typical capacitance vs. drain-source voltage fig.11 switching characteristics static drain - source on - state resistance : r ds ( on )[m ? ] gate-source voltage : ? v gs [v] switching time : t [ns] drain-current : ? i d [a] gate-source voltage : ? v gs [v] total gate charge : qg [nc] drain-source voltage : ? v ds [v] capacitance : c [pf] 4/5 2010.08 - rev.a data sheet www.rohm.com ?2010 rohm co., ltd. all rights reserved.
RRF015P03 ? measurement circuits ? notice this product might cause chip aging and breakdown under the large electrified environment. please consider to design esd protection circuit. fig.1-2 switching waveforms 90% 90% 90% 10% 10% 10% 50% 50% pulse width v gs v ds t on t off t r t d(on) t f t d(off) fig.2-2 gate charge waveform v g v gs charge q g q gs q gd f ig.1-1 switching time measurement circu it v gs r g v d s d.u.t. i d r l v dd f ig.2-1 gate charge measurement circuit v gs i g(const.) r g v d s d.u.t. i d r l v dd 5/5 2010.08 - rev.a data sheet www.rohm.com ?2010 rohm co., ltd. all rights reserved.
r1010 a www.rohm.com ? 2010 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specified herein is subject to change for improvement without notice. the content specified herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specifications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specified in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specified in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any product, such as derating, redunda ncy, fire control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospac e machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specified herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law. data sheet www.rohm.com ?2010 rohm co., ltd. all rights reserved.
r1010 a www.rohm.com ? 2010 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specified herein is subject to change for improvement without notice. the content specified herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specifications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. great care was taken in ensuring the accuracy of the information specified in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specified in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any product, such as derating, redunda ncy, fire control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospac e machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specified herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.
|
